Sub Technical Inc 724-625-0008 24/7
Underground Water Control

"Fast, Efficient,
and Professional"

"They stopped water I thought
would never be stopped"

"Sub-Tech won't leave until
the job is done right"

"Response time in an
emergency is FANTASTIC"

"Their technicians were very helpful
and really know their business"

"Sub-Tech has always taken the time to
explain everything and answer my questions"

"You may as well call them first because if
you don't, you will be calling them second"

"Sub-Tech succeeded where other
companies failed miserably"

Industry News

Permanent Ventilation Seal Repair using HyperFlex

By Chris on 06-11-2017

Permanent Mine Ventilation Seal Repair using HyperFlex:

This mine had issues with both methane and water infiltration around their permanent ventilation seals. The problem led to MSHA periodically shutting the mine down due to elevated gas levels. We first drilled the roof, rib, and floor, intersecting the perimeter of the seals about halfway back through the thickness of the seals (in this case about 3 feet). Using our high volume pumps and working out of 55 gallon drums, we injected HyperFlex through extension rods into the joint between the perimeter of the seal and the coal seam. The HyperFlex moves into all the voids and cracks in the area and fills them, eliminating the water and/or gas as an issue. HyperFlex, due to its physical properties, especially flexibility, will not fracture the cleat while still maintaining its seal during normal ground movement and settlement. In this case we averaged about 1000 pound (100 gallons) of HyperFlex for each of the many seals in this project.

Please contact Sub-Technical at 724-625-0008 if you would like to learn more about ways we can help you with leaking ventilation seals.